It's a good value, the only problem so far with only one cut on it I'm concerned about the throttle control, it won't stay at the rpm I set it on! if you put it about 1/2 throttle to cut about 3 minutes later the RPMs are back down at a high idle not enough rpm's to cut without the engine laboring and I tried using the water hose deck cleaner after but it didn't work either water went in but didn't cross over and out the other side. that's a disappointment because that really saves a deck from rot.
files/base_image_7_9.jpg
files/20200603_154901.jpg
files/20200603_154949.jpg
files/20200603_154922.jpg
files/20200603_154915.jpg
files/20200603_154939.jpg
files/20200603_155003.jpg
files/20200603_154928.jpg
files/20200603_154908.jpg
files/20200603_154957.jpg
files/20200603_155048.jpg
files/20200603_155056.jpg
files/20200603_155118.jpg
files/20200603_155016.jpg
files/20200603_155145.jpg
files/20200603_155254.jpg
files/20200603_155024.jpg
files/20200603_155112.jpg
files/20200603_155131.jpg
files/20200603_155035.jpg
