Multiquip WTE5HP Mobile Water Trailer With Electric Brakes 525 Gal

Multiquip WTE5HP Mobile Water Trailer 525 Gal

The Multiquip WT5HP Water Trailer is ready to tackle a host of assignments to include: Dust Control, Emergency Fire Fighting Response, Construction, Agricultural Support and Equipment Wash Down. This mobile unit features: Double-Axle Trailer, powerful high psi MQ QP205SH Centrifugal Pump, flexible Suction/Discharge manifold system with simple valve operations, hose reel assembly, and a rugged 525 GAL polyethylene Water Tank. The model WTE5HP provides electric brakes.

Features : 

Store up to 525 gallons of water in a durable polyethylene water tank with integrated baffles to support water movement during transportation

• For the Multiquip WTE5HP, this specification defines the unit's "Dynamic Fluid Chassis." By housing 525 gallons within a high-density polyethylene reservoir equipped with Internal Surge Baffles, the trailer transforms a massive liquid mass into a stable, towable asset. This engineering is critical for safety, as the baffles act as internal bulkheads to break up the kinetic energy of "sloshing" water, preventing the 4,300+ lbs of fluid from shifting the trailer's center of gravity during highway transport or sudden braking.
  

Dependable high pressure performance with Multiquip QP205SH 2 inch centrifugal pump

• For the Multiquip WTE5HP, this specification identifies the "High-Velocity Powerhouse" of the system. By integrating the QP205SH 2-inch High-Pressure pump, the trailer transitions from a standard water carrier to a precision fire-fighting and high-impact cleaning engine. Unlike standard trash pumps, this centrifugal unit is engineered specifically for High-Head applications, generating the extreme discharge velocity required for long-distance stream projection and high-altitude water delivery.
  

QP205SH delivers 106 GPM/230 Ft HEAD/100 psi

• For the Multiquip WTE5HP, this performance benchmark defines the "Extreme-Velocity Fluid Engine." Unlike standard utility trailers, the QP205SH pump is a high-pressure powerhouse engineered to prioritize vertical lift and impact force. With a 100 PSI output and a 230-foot vertical reach, it transforms the 525-gallon reservoir into a precision tool for high-rise dust suppression, emergency fire watch, and high-impact equipment decontamination.
  

Components protected from damage by low profile manifold assembly

• For the Multiquip WTE5HP, this specification describes the unit’s "Vulnerability-Shielded Plumbing Engine." By utilizing a Low-Profile Manifold Assembly, Multiquip has engineered the fluid-distribution center to sit beneath the trailer’s primary structural perimeter. This strategic "enclosure" ensures that the high-pressure valves, handles, and discharge ports are shielded from being sheared off or crushed by accidental impact from heavy machinery or tight-quarter maneuvering on high-traffic jobsites.
  

Attached industrial Hose Reel assembly (1” x 50’ contractor hose and fog spray nozzle)

• For the Multiquip WTE5HP, this specification identifies the "Precision-Deployment Engine." By integrating a chassis-mounted Industrial Hose Reel outfitted with a 1” x 50’ Contractor Hose and a Fog/Stream Nozzle, the trailer is transformed into a rapid-response suppression and cleaning station. This assembly utilizes the pump’s 100 PSI high-pressure output to create a focused, high-velocity stream that can be deployed or retracted in seconds, ensuring the 525-gallon reservoir is utilized with surgical accuracy for fire watch, dust control, or equipment decontamination.
  

Switch easily from suction to discharge mode by turning a single manifold lever

• For the Multiquip WTE5HP, this specification identifies the "Dual-Action Hydraulic Gateway." By utilizing a Single-Lever Manifold, the trailer eliminates the complexity of multi-valve operations. This "Master Switch" allows the operator to instantly toggle the 100 PSI high-pressure system between Suction Mode (self-filling the 525-gallon tank from a pond or creek) and Discharge Mode (powering the high-head nozzles or spray bar), ensuring zero downtime and preventing the manifold errors that can lead to pump cavitation.
  

Rear spray bar operates under pressurized or gravity feed settings

• For the Multiquip WTE5HP, this specification identifies the "Dual-Force Discharge Engine." By offering both Pressurized and Gravity-Feed modes, the rear spray bar provides the operator with total control over water application. You can engage the 100 PSI high-pressure pump for high-velocity, wide-path dust suppression, or utilize the Gravity-Feed setting for controlled, low-impact saturation—ensuring the 525-gallon reservoir is utilized with maximum efficiency based on your specific jobsite requirements.
  

Quickly fill tank through 2" diameter steel pipe with QD coupler or vented 12" diameter fill port

• For the Multiquip WTE5HP, this specification identifies the "Dual-Speed Intake Engine." By offering both a high-velocity 2-inch steel pipe with a Quick-Disconnect (QD) coupler and a massive 12-inch vented top port, the trailer provides ultimate "fill engine" flexibility. Whether you are drafting from a hydrant at high pressure or gravity-filling from a water tower, this dual-access system ensures the 525-gallon reservoir is replenished with zero downtime.

Rapid hose setup with standard Quick Disconnect (cam & groove) fittings

• For the Multiquip WTE5HP, this specification identifies the "High-Response Mounting Engine." By standardizing the entire plumbing chassis with Quick Disconnect (Cam & Groove) fittings, the trailer eliminates the need for pipe wrenches and manual threading. This "snap-lock" interface transforms the 525-gallon reservoir into a rapid-deployment tool, allowing the operator to transition between intake, spray bar, and high-pressure hose modes in seconds—a critical performance factor for emergency fire watch and high-velocity dust control.
  
  

Safe towing and braking assured by a dual axle trailer and rugged hydraulic brake system

• For the Multiquip WTE5HP, this specification identifies the "Electronic-Precision Transport Engine." By integrating a Dual-Axle Chassis with an advanced Electric Brake System, the trailer converts a 7,000-lb dynamic load into a highly controllable mobile asset. This tandem-axle "chassis" provides the footprint required to stabilize the 525-gallon tank, while the electric brakes offer a digital interface with your truck, providing synchronized, proportional stopping power that scales with the water weight—ensuring peak operator safety during highway transport and steep jobsite descents.
  

Convenient Hose Kit provided (2" x 20' Suction)

• For the Multiquip WTE5HP, this specification identifies the "High-Vacuum Intake Engine." By providing a 2" x 20' Suction Hose Kit, Multiquip ensures the 525-gallon fluid engine is equipped for immediate self-filling (drafting) operations. This reinforced "intake chassis" allows the high-pressure pump to draw water from natural sources or auxiliary tanks at a laminar flow rate, ensuring the 525-gallon reservoir can be replenished in the field without relying on pressurized municipal hydrants.

Unit Specifications :

• Water Tank 525 Gal. Polyethylene
• Trailer DOT certified, dual axle, 3500 LB
• Power Source HONDA GX160 recoil start
• Pump MQ QP205SH 2 in. High Pressure Centrifugal
• Flow / Head 106 GPM / 230 Ft.
• Manifold 1.5" & 2" Left/Rt. (QD Couplers), three garden hose valves, rear spray bar

Dimensions & Weights : 

• Overall Length 146 in 3708.4 mm
• Overall Width 68 in 1727.2 mm
• Overall Height 80 in 2032 mm
• Operating Weight 1,428 lb 647.73 kg