Multiquip FXA50A6 33' High Cycle Concrete Vibrator Ext. Cord

Multiquip FXA5A6 - High Cycle Concrete Vibrator Ext. Cord

High-cycle vibrators are used with low-slump concrete where consistent power is needed to work a stiff mix into corners, around rebar and remove entrapped air pockets. These vibrators use a three-phase motors at 180 cycles and require a special generator capable of generating 180 cycles. The benefit is these vibrators retain 95% of their power under load.

Features:

2" head, 20' hose, 33' cord, 180 Hz

• A complete high-cycle vibrator assembly featuring a 2 inch  head, an extended 20 foot hose, and a generous 33 foot cord, operating at 180 Hz for deep and efficient consolidation.

Powered by a 4.5-amp electric motor

• Features an efficient 4.5 amp  electric motor for reliable performance.
  

Permanently lubricated oversized head bearings for unmatched durability

• Features permanently lubricated, oversized head bearings, guaranteeing unmatched durability and extended service life.

Hose can be extended to 45 feet (13.5 meters)

• The flexible hose is capable of being extended up to 45 ft (13.5 m).
  

Optional 50- and 100-foot (15, 30 meters) extension cords available

• Optional extension cords are available in 50 foot 15 m and 100 foot (30 m) lengths for increased reach.
  

Requires high-cycle generator GDP5H

• Requires the GDP5H high-cycle generator for operation (sold separately).