- Home /
- Engines /
- Briggs Engine Horizontal 250cc 11.5 Gross Torque 15T212-0160 Briggs Engine Horizontal 250cc 11.5 Gross Torque 15T212-0160
Description
Specifications
Reviews
Questions (1)
Features
- Overhead valve design (OHV) for cooler operation and longer valve life.
- Kool Bore aluminum alloy bore for cooler operation
- Maintenance-free Magnetron electronic ignition for quick, dependable starts
- Dual Clean air cleaner pleated paper filter with a foam pre-cleanerto ensure maximum protection for extended engine life.
Specs
| Brand | Briggs & Stratton |
| Part # | 15T212-0160-F8 |
| Shipping Weight | 41.25 lbs. |
| Crankshaft Diameter | 1" |
| Crankshaft Length | 2-7/8" |
| Starter Type | Recoil |
| Max RPM | 3,800 |
| Carburetor Type | Float |
| Displacement | 205cc |
| Ignition System | Electronic |
| Lubrication System | Splash |
| Oil Capacity | 0.625 qt. |
| Fuel Type | Gasoline |
| Governor System | Mechanical |
| Cooling System | Air |
| Compression Release | Yes |
| Gross Torque (ft./lbs) | 11.5 Gross Torque |
| Low Oil Alert | No |
| Oil Filter | No |
| Bolt Circle (in.) | 3 5/8 |
| Cylinders | 1 |
| Cylinder Bore | Aluminum |
| Bore x Stroke | 2.97" x 2.20" |
| Crankshaft Orientation | Horizontal |
| For Use in California | Yes |
| Fuel Tank Capacity | 3 qt. |
| MPN | 15T212-0160-F8 |
|---|---|
| UPC | 024847074413 |
| Manufacturer | Briggs and Stratton |
| Engine Size | N/A |
| Engine Type | 4-Stroke |
| Starting System | Recoil Start |
| Part # | 15T212-0160 |
| Shaft Position | Horizontal |
| # of Cylinders | 1 |
| Shaft Width | 1/4" |
| Shaft Length | 2-7/8" |
| Oil tank volume | 0.625 qt. |
| Engine Cooling | Air |
| Weight (lbs.) | 41.25 |
| Warranty | 2 Years Consumer Limited |
| Able To Be Shipped | Yes |
| Shipping Options | Standard Ground Shipping |
Customer Reviews
Please wait...
No reviews have been found
Questions:
Posted by Ronald Andrus, Saturday, August 11, 2018 on product Briggs Engine Horizontal 250cc 11.5 Gross Torque 15T212-0160
Question:
On your specifications chart it says your shaft is 1/4 " Is that supposed to be 1' Dia shaft and 1/4' keyway slot x 27/8 length shaft
Answers:
-
Posted by Tammy Strong on Saturday, August 11, 2018
Yes, 1" dia and 1/4th " keyway, that is correct.
Can you answer these question?
x
Price:
Actual Price:
Our price is lower than the manufacturer's "minimum advertised price." As a result, we cannot show you the price in catalog or the product page.
You have no obligation to purchase the product once you know the price. You can simply remove the item from your cart.
You have no obligation to purchase the product once you know the price. You can simply remove the item from your cart.
Our price is lower than the manufacturer's "minimum advertised price." As a result, we cannot show you the price in catalog or the product page.
You have no obligation to purchase the product once you know the price. You can simply remove the item from your cart.
You have no obligation to purchase the product once you know the price. You can simply remove the item from your cart.
Loading...