Advanced Chute System Lawn Mower Discharge Chute Blade Blocker

Yes, you have to fill out what kind of mower you have and deck size and a few more things when you go to purchase this item.

Yes it is universal, just type in the deck size when you go to purchase it.

The Ferris 48" & 52"ACS will use Model: ACS6000UBLS.

I am not sure, we need pictures of the discharge hole to help you out. 

yes it will.

yes it will.

This  Advanced Chute System will fit the Toro Z255.

Yes, the Discharge Chute Blade Blocker will work with the 52" Toro TitanHD.

Yes it will fit a Toro 52". 

Yes, it will work. 

What size cut?

If you have an ultra cut or Tri Adv deck, then yes.

If you have a ultra cut deck, then yes it will fit.

It shows it will fit a Ferris SRS and they are not too hard to install.

Yes the Advance chute will fit.

Yes it will fit a 48" deck on a Ferris 1500. 

No, sorry this will  not fit a Toro Timecutter Hd with a 54" deck. 

Sorry, this will not fit your Torro Timecutter 50" mower.

What size deck?

Yes it will fit a JD950M 60" commercial zero turn.

It should with minor adjustments.

Is this a walk behind?

Yes it will fit.

Yes it will fit you model.

Yes this will fit your mower.

Yes it will fit. We just need to know your model and serial

If the mower has a welded deck it will fit.

Yes this will fit your mower without major modifications.

Yes this will fit your mower.

Yes this will fit. When you place the order we will need to know what size deck, and the model 

They will not. To install an advanced chute system you cannot have any brackets on the discharge side of your mower.

Unfortunatly the 34" mower decks are to small to mount these on.

Yes, this will fit you mower.

No, you will have to drill holes.

As long as it is bigger than a 50" cut.

Yes this will fit that model. (Does require some drilling)

Advanced chute systems do not work with MTD mowers.

We would just need to know the model of your mower and we would get you the correct model of discharge chute.

Yes, this is a universal blade blocker.

They do make models that will fit the Ferris mowers.

The Advance Chute System is universal and will fit almost all mowers. So yes this will fit your mower.

Yes it will.

Yes, it will fit an M-ZT52.

It should fit but I would need more information on your mower. What size deck? Diesel or gas?

Yes it will fit that mower. Installation requires the drilling of holes and power tools, it should take you about 1:30 to 2:00 hours to install.

If it has a triton deck then, yes we can fit it. 

Yes, there is an option to fit an M-ZT61.

No the same kit will not work on a 72in hustler. 

Yes It will fit on the 48in model, NOT the 42in model.

I beliver Pioneer Examarks have an Ultra Cut style deck, if yours does then yes. There is an Advanced Chute System for that deck. 

No unfortunately they do not.