Call us: (615) 641-7720 | Hablamos EspaƱol

Multiquip DLW330X2WR Welder Generator 10.5kW 120V 240V Kubota Diesel W/ Remote

Out of stock
SKU
DL330X2WR
Delivery Cost: $950.00
Multiquip DLW330X2 340A Welder Generator 10.5kW 120V 240V Kubota Diesel. This unit comes with a remote.
Standard Delivery
Finance Your Purchase
Shop All Generators

Multiquip DLW330X2WR Welder 

340 amp Welder, 10.5 KW 120/240V Gen
This CC (Constant Curent) and CV (Constant Voltage) welder delivers up to 340 amps of operation for one man, or simultaneous two man operation with 200 amps of output per operator. Additionally, it provides up to 10.5 kW of 120/240 volt AC power. A digital display provides both amperage/voltage and troubleshooting error code information to the operator. In e-mode the unit can weld at idle speed to optimize fuel economy. Low noise level of only 61.3dBA. This is the welder that gives you more spark for your arc. The SmartStick sensor automatically shuts off the engine during periods of no load and restarts it when the operator strikes the welding rod. The variable sensor - adjustable from one to 30 minutes - enables the operator to select the optimum working conditions and reduce fuel consumption.
  • The convenience of one man -man or two-man opeation

  • Independent controls and up to 200 amps for each operator or 340 amps for one operator

  • E-mode improves fuel efficiency by allowing the operator to weld with the engine at idle speed at up to 200 amps

  • Arc Force Control allows the operator to fine tune DC current during low voltage welding conditions and helps prevent electrodes from sticking during short arc length welding

  • Super clean voltage regulation 1.5% (+/-)

  • Smart Stick sensor to automatically shut off the engine during periods of no load and restart when operator strikes the welding rod

  • Tier 4 Kubota diesel engine D902

 

Unit Specifications
DC Voltage CC: 31.2, 2 x 26.6CCV V
DC Current CC: 280, 2 x 165 A CV: 280, 2 x 165 A
Current Range 70-340, 2x35-200 A
Max Duty Cycle
w/ Full Amps Availible
100% @280, 2 x 165 A
Welding Processes SMAW
FCAW
GTAW
ACAC
Fuel Tank Capacity 9.5 gal 36 L
Fuel Consumption
at Rated Load
1.1 gph

 

 

Generator Specifications

AC Power Output
(Single Phase)
10.5 kW
Cycle 60 Hz
Voltage 120/240 V
Amperage 87.6/43.8 A
Voltage Regulation 1.5 %
Receptacles NEMA 5-20R 125V GFCI 20A
NEMA L5-30R 125V Twist-Lock 30A
NEMA L6-30R 250V Twist-Lock 30A
CS-6369 125/250VAC Twist-Lock 50A
**TRLR-MPXF has a built in 28 gal. fuel cell

 

Dimensions & Weights

Overall Length 50.8 in 129 mm
Overall Width 26.8 in 68 mm
Overall Height 33.1 in 84 mm
Operating Weight 893 lb 446 kg

 

More Information
MPNDL330X2WR
ManufacturerMultiquip
Wattage10,000 W
Fuel TypeDiesel
Receptacles1 each (NEMA 5-20R 125V GFCI 20A NEMA L5-30R 125V Twist-Lock 30A NEMA L6-30R 250V Twist-Lock 30A CS-6369 125/250VAC Twist-Lock 50A)
Sound Level RangeN/A
Length50.8 in.
Width26.8 in.
Height33.1 in.
Weight (lbs.)893 lbs.
DC VoltageCC: 31V
Engine ManufacturerN/A
Shipping OptionsStandard Delivery
Write Your Own Review
You're reviewing:Multiquip DLW330X2WR Welder Generator 10.5kW 120V 240V Kubota Diesel W/ Remote
Your Rating